Technical report on operating experience with BWR pressure relief systems.

Bibliographic Details
Corporate Author:	U.S. Nuclear Regulatory Commission. Division of Operating Reactors
Language:	English
Published:	Washington : Springfield, Va. : Nuclear Regulatory Commission, Office of Nuclear Regulation, Division of Operating Reactors ; For sale by the National Technical Information Service, 1978.
Subjects:	Boiling water reactors > Safety measures. Nuclear pressure vessels > Testing.
Physical Description:	i, 44 pages, 14 unnumbered pages : illustrations ; 27 cm
Format:	Government Document Book

Similar Items

BWR and PWR off-normal event descriptions.
Published: (1987)

BWR scram system.
Published: (1980)

BWR off-gas systems--enclosing NUREG/CR-0727.
Published: (1979)

Recriticality in a BWR following a core damage event
Published: (1990)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1985)

Single-phase and two-phase natural circulation tests in the PUMA facility
Published: (1998)

Safety/relief valve quencher loads : evaluation for BWR Mark II and III containments.
Published: (1982)

Interfacing systems LOCA : boiling water reactors
by: Chu, T. L.
Published: (1989)

Identification and assessment of containment and release management strategies for a BWR Mark III containment
by: Lin, C. C.
Published: (1992)

Identification and assessment of containment and release management strategies for a BWR Mark I containment
by: Lin, C. C.
Published: (1991)

Identification and assessment of containment and release management strategies for a BWR Mark II containment
by: Lin, C. C.
Published: (1992)

Reactor vessel pressure transient protection for pressurized water reactors
by: Zech, Gary
Published: (1978)

BWR anticipated transients without scram in the MELLLA+ expanded operating domain
by: Cheng, Lap-Yan
Published: (2015)

BWR Refill-Reflood Program, final report
by: Myers, L. L.
Published: (1983)

BWR Refill-Reflood Program task 4.7-model development basic models for the BWR version of TRAC
by: Andersen, J. G. M.
Published: (1983)

Risk related reliability requirements for BWR safety-important systems with emphasis on the residual heat removal system
by: Tzanos, C. P.
Published: (1984)

Report on BWR control rod drive mechanical failures : technical activity B-48
by: Jabbour, K. N.
Published: (1979)

PWR and BWR pressure vessel fluence calculation benchmark problems and solutions
Published: (2001)

The Response of BWR Mark III containments to short-term station blackout severe accident sequences
Published: (1991)

BWR ECCS pump suction concerns following a LOCA
by: Krotiuk, W. J.
Published: (2016)

Issuance of NUREG-0313, rev 1, "Technical report on material selection and processing guidelines for BWR coolant pressure".
Published: (1980)

BWR Refill-Reflood Program task 4.8--TRAC-BWR model qualification for BWR safety analysis : final report
by: Alamgir, Mohammed, 1951-
Published: (1983)

BWR control rod failures.
Published: (1980)

Determination of the neutron and gamma flux distribution in the pressure vessel and cavity of a boiling water reactor
by: Asgari, M. (Mehdi), 1960-
Published: (1990)

Suppression pool temperature limits for BWR containments : generic technical activity A-39
by: Su, T. M.
Published: (1981)

BWR reactor water cleanup system flexible wedge gate isolation value qualification and high energy flow interruption test
by: DeWall, Kevin G.
Published: (1989)

A demonstration experiment of steam-driven, high-pressure melt ejection : the HIPS-10S test
by: Allen, M. D.
Published: (1990)

Aging assessment of Westinghouse PWR and General Electric BWR containment isolation functions
Published: (1996)

Main steam line break analysis for Lungmen ABWR
by: Shih, Chunkuan
Published: (2016)

Water hammer, flow induced vibration and safety/relief valve loads
by: Valandani, P.
Published: (1984)

BWR scram discharge system.
Published: (1980)

BWR scram discharge system.
Published: (1981)

Boiling water reactor licensees use of the BWRVIP-05 report to request relief from augmented examination requirements on reactor pressure vessel circumferential shell welds.
Published: (1998)

BWR fuel exposure in excess of limits.
Published: (1980)

The effects of aging on BWR core isolation cooling systems
by: Lee, B. S.
Published: (1994)

Technical report on material selection and processing guidelines for BWR coolant pressure boundary piping : final report
by: Hazelton, W. S.
Published: (1988)

Regulatory analysis for the resolution of generic issue C-8, "main steam isolation valve leakage and LCS failure"
by: Graves, C. C.
Published: (1990)