Fundamental tool wear study in turning of Ti-6Al-4V alloy (Ti64) and nano-enhanced Minimum Quantity Lubrication (MQL) milling / by Trung Kien Nguyen.

Bibliographic Details
Main Author:	Nguyen, Trung Kien (Of Michigan State University)
Language:	English
Published:	2015.
Subjects:	Titanium alloys. Titanium-aluminum-vanadium alloys > Machinability. Milling (Metal-work) Tools. Strains and stresses. Mechanical wear. Electronic dissertations. Academic theses.
Genre:	Electronic dissertations. Academic theses.
Online Access:	Connect to online resource - All users (Digital Object Identifier Permalink) Connect to online resource - MSU authorized users
Dissertation Note:	Ph. D. Michigan State University. Mechanical Engineering 2015
Physical Description:	1 online resource (xxii, 208 pages) : illustrations
Format:	Thesis Electronic eBook

Similar Items

Flight service evaluation of two aluminum-brazed titanium spoilers
by: Boyer, Rodney
Published: (1984)

Effect of local crystal orientations on the adiabatic shearing and cracking in the formation of segmented Ti-6Al-4V chips from turning
by: Lu, Jiawei 1992-
Published: (2023)

Tool wear mechanisms in turning TI-6AL-4V using tungsten carbide and polycrystalline diamond inserts
by: Schrock, David James
Published: (2013)

Ti-6A1-4V alloy castings prepared in zircon sand molds and the effect of hot isostatic pressing
by: Paige, J. I. (Jack I.)
Published: (1984)

Surface effects on hydrogen permeation through Ti-14Al-21Nb alloy
by: Sankaran, Sankara N.
Published: (1991)

A modified Zerilli-Armstrong constitutive model describing the strength and localizing behavior of Ti-6Al-4V
by: Meyer, Hubert W., Jr
Published: (2006)

Phase transitions in high temperature ordered intermetallic titanium aluminum alloys
by: Sircar, Subhasish
Published: (1987)

Phase transitions in high temperature ordered intermetallic titanium aluminum alloys
by: Sircar, Subhasish
Published: (1987)

Tool wear mechanisms in turning TI-6AL-4V using tungsten carbide and polycrystalline diamond inserts
by: Schrock, David James
Published: (2013)

Dimensional stability of Ti-6Al-6V-2Sn
by: Rack, H. J. (Henry J.)
Published: (1978)

Analysis of the deformation behavior of the hexagonal close-packed alpha phase in titanium and titanium alloys
by: Li, Hongmei (Process engineer)
Published: (2013)

Aging effects and phase transformations in a Ti₄₉.₅Ni₄₈Cr₂.₅ alloy
by: Kim, Chulsoo
Published: (1986)

R&D of structural intermetallic compound TiAl : by Tokuzou Tsujimoto.
by: Tsujimoto, Tokuzou
Published: (1993)

Effect of thermomechanical treatments on the transformation behavior of a TiNi alloy
by: Hou, Kuang-Hua
Published: (1986)

Effect of thermomechanical treatments on the transformation behavior of a TiNi alloy
by: Hou, Kuang-Hua
Published: (1986)

Tensile crack initiation in [gamma]-TiAl
by: Simkin, Benjamin Andrew
Published: (2003)

A micromechanistic interpretation of cyclic crack-growth behavior in a beta-annealed Ti-6A1-4V alloy
by: Yoder, G. R.
Published: (1976)

Effect of alloying additions of aluminium and iron on the creep resistance of Ti-12Cr (wt.%)
by: Chakravarty, Harish Narasimhan
Published: (2019)

Development of stress in Ni-Ti thin films
by: Zhao, Zhibo
Published: (1995)

Development of stress in Ni-Ti thin films
by: Zhao, Zhibo
Published: (1995)

Material characterization of superplastically formed titanium (Ti-6Al-2Sn-4Zr-2Mo) sheet
by: Ossa, William A.
Published: (1987)

On the reversion phenomena of Cu-3% Ti alloys
by: Nagata, K.
Published: (1988)

Studies of crack propagation and microcrack initiation in a near-gamma TiAl alloy
by: Ng, Boon-Chai
Published: (2005)

Studies of crack propagation and microcrack initiation in a near-gamma TiAl alloy
by: Ng, Boon-Chai
Published: (2005)

Wear of aluminum and hypoeutectic aluminum-silicon alloys in boundary-lubricated pin-on-disk sliding
by: Ferrante, John, 1936-
Published: (1979)

Gamma titanium aluminide alloys 2014 a collection of research on innovation and commercialization of gamma alloy technology
Published: (2014)

Effect of LID® processing on the microstructure and mechanical properties of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo titanium foil-gauge materials
by: Blackburn, Linda B.
Published: (1987)

Oxidation characteristics of Ti-25Al-10Nb-3V-1Mo intermetallic alloy
Published: (1990)

Ballistic V50 evaluation of TIMET Ti108
by: Hogan, John
Published: (2018)

Thermoviscoplastic response of Ti-15-3 under various loading conditions
by: Tuttle, M. E.
Published: (1991)

Thermoviscoplastic response of Ti-15-3 under various loading conditions
by: Tuttle, M. E.
Published: (1991)

Studies of crack propagation and microcrack initiation in a near-gamma TiAl alloy
by: Ng, Boon-Chai
Published: (2005)

Aging effects and phase transformations in a Ti₄₉.₅Ni₄₈Cr₂.₅ alloy
by: Kim, Chulsoo
Published: (1986)

Diffusion bonding of titanium alloys : fifth quarterly report
by: Smith, Curtiss A.
Published: (1967)

Development of stress in Ni-Ti thin films
by: Zhao, Zhibo
Published: (1995)

Influence of microstructure and test temperature on tensile and creep properties of titanium alloys
by: Gysler, Albert
Published: (1979)

Influence of microstructure and test temperature on tensile and creep properties of titanium alloys
by: Gysler, Albert
Published: (1979)

Electrolytic hydrogen in beta titanium
by: DeLuccia, John J.
Published: (1976)

Electrolytic hydrogen in beta titanium
by: DeLuccia, John J.
Published: (1976)

Titanium and titanium alloys.
by: Everhart, John Laurence, 1903-
Published: (1954)