Report on ECCS cladding models, NUREG-0630.

Bibliographic Details
Uniform Title:	Generic letter ; 80-106.
Corporate Author:	U.S. Nuclear Regulatory Commission (Issuing body)
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, 1980.
Series:	Generic letter ; 80-106.
Subjects:	Emergency core cooling systems. Nuclear fuel claddings.
Online Access:	Connect to online resource - All users (Federal Depository Library Program Persistant URL)
Physical Description:	1 online resource.
Variant Title:	Report on emergency core cooling system cladding models, NUREG-0630
Format:	Government Document Electronic eBook

Similar Items

ECCS calculations on fuel cladding.
Published: (1979)

NUREG-0630 "Cladding, swelling and rupture--models for LOCA analysis".
Published: (1980)

Westinghouse ECCS evaluation models.
Published: (1986)

Cladding swelling and rupture models for LOCA analysis
by: Powers, D. A. (Dale A.)
Published: (1980)

Degradation of automatic ECCS actuation capability by isolation of instrument lines.
Published: (1981)

Effect of a DC power supply failure on ECCS performances.
Published: (1980)

Predicted increase in fuel rod cladding oxidation.
Published: (1998)

Evaluation of simulated-LOCA tests that produced large fuel cladding ballooning
by: Powers, D. A. (Dale A.)
Published: (1979)

Properties of light water reactor spent fuel cladding
by: Farwick, D. G.
Published: (1979)

Subcooled and low quality film boiling of water in vertical flow at atmospheric pressure [prepared for the Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission].
by: Fung, K. K.
Published: (1981)

An assessment of fuel melting, radial extrusion, and cladding thermal failure during a power-cooling-mismatch event in light water reactors
by: El-Genk, Mohamed S.
Published: (1979)

Creepdown of zircaloy fuel cladding-initial tests
by: Hobson, D. O.
Published: (1978)

Assessment of current test methods for post-LOCA cladding behavior
by: Billone, Michael C.
Published: (2012)

Actuation of ECCS in the recirculation mode while in hot shutdown.
Published: (1980)

Pellet-cladding mechanical interaction in Halden assembly IFA-226
by: Owen, Dennis E.
Published: (1978)

Mechanical behavior of ballooned and ruptured cladding
by: Flanagan, Michelle
Published: (2012)

Control rod guide tube wear in operating reactors : operating experience report.
by: Riggs, R.
Published: (1980)

Cladding rupture, swelling & coolant blockage as a result of a reactor accident.
Published: (1979)

Cracking in charging pump casing cladding.
Published: (1980)

Effect of particle blending on HTGR fuel rod temperature profiles : HTGR fuel recycle development program (189a OHO45) Fuel Refabrication, task 500
by: Angelini, P., 1932-
Published: (1979)

Detection of small-sized near-surface under-clad cracks for reactor pressure vessels
Published: (1983)

Potentially inadequate performance of ECCS in PWRs during recirculation operation following a LOCA.
Published: (1988)

Zircaloy cladding collapse under off-normal temperature and pressure conditions
by: Olsen, Charles S.
Published: (1978)

Results from irradiation of vented GCFR fuel rods in the GB-9 and GB-10 capsule experiments
by: Longest, A. W.
Published: (1978)

Variations in zircaloy-4 cladding deformation in replicate LOCA simulation tests
by: Longest, A. W.
Published: (1982)

Analysis of ECC bypass data
by: Beckner, W. D.
Published: (1979)

Data base on the behavior of high burnup fuel rods with Zr-1%Nb cladding and UO₂?fuel (VVER type) under reactivity accident conditions.
by: Yegorova, L. A. (Larisa Alexandrovna)
Published: (1999)

Ultimate heat sink thermal performance and water utilization : measurements on cooling and spray ponds
by: Athey, G. F.
Published: (1982)

Results from the run-beyond-cladding-breach irradiation of a predefected fuel pin (RBCB-7)
by: Langstaff, D. C.
Published: (1980)

Results from the run-beyond-cladding-breach irradiation of a predefected fuel pin (RBCB-6)
by: Langstaff, D. C.
Published: (1979)

Biaxial creep behavior of ribbed GCFR cladding at 650.
Published: (1977)

In-pile observation of fuel and clad relocation during LMFBR core-disruptive accidents
by: Wright, S. A.
Published: (1989)

Debris bed quenching under bottom flood conditions (in-vessel degraded core cooling phenomenology)
Published: (1984)

Conceptual design of alternative core melt mitigation systems for a PWR with an ice-condenser containment
Published: (1982)

Experiment data report for LOFT nonnuclear test L1-5 : (isothermal test with core 1 installed)
by: Jacoby, Marshall S.
Published: (1978)

Modeling of crack growth in oxidized zircaloy cladding during thermal-shock conditions
by: Majumdar, S. (Saurindranath)
Published: (1978)

Cracking of cladding and its heat-affected zone in the base metal of a reactor vessel head.
Published: (1990)

An aluminum-zircaloy galvanic couple in reactor water
by: Horton, Ralph M.
Published: (1978)

Knowledge base for the effect of debris on pressurized water reactor emergency core cooling sump performance
Published: (2003)

Knowledge base for the effect of debris on pressurized water reactor emergency core cooling sump performance
Published: (2003)